series am1d - rz 1 watt | dc- dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12. c 1 of 5 north america only features: models single output model input voltage (v) output voltage (v) output current max (ma) isolation (vdc) max capacitive load (uf) efficiency am1d - 0505s - r z 4.5 - 5.5 5 200 1000 220 84 am1d - 0509s - r z 4.5 - 5.5 9 111 1000 220 86 am1d - 0512s - r z 4.5 - 5.5 12 83 1000 100 87 am1d - 0515s - r z 4.5 - 5.5 15 66 1000 100 87 am1d - 1205s - r z 10.8 - 13.2 5 200 1000 220 84 am1d - 1209s - r z 10.8 - 13.2 9 111 1000 220 86 am1d - 1212s - r z 10.8 - 13.2 12 83 1000 100 88 am1d - 1215s - r z 10.8 - 13.2 15 66 1000 100 88 am1d - 15 05s - r z 13.6 - 16.5 5 200 1000 220 84 am1d - 15 09s - r z 13.6 - 16.5 9 111 1000 220 86 am1d - 15 12s - r z 13.6 - 16.5 12 83 1000 100 87 am1d - 15 15s - r z 13.6 - 16.5 15 66 1000 100 89 am1d - 2405s - r z 21.6 - 26.4 5 200 1000 220 83 am1d - 2409s - r z 21.6 - 26.4 9 111 1000 220 86 am1d - 2412s - r z 21.6 - 26.4 12 83 1000 100 87 am1d - 2415s - r z 21.6 - 26.4 15 66 1000 100 87 am1d - 48 05s - r z 43.6 - 52.8 5 200 1000 220 79 am1d - 48 09s - r z 43.6 - 52.8 9 111 1000 220 82 am1d - 48 12s - r z 43.6 - 52.8 12 83 1000 100 82 am1d - 48 15s - r z 43.6 - 52.8 15 66 1000 100 81 am1d - 0505 sh30 - r z 4.5 - 5.5 5 200 3000 220 84 am1d - 0509 sh30 - r z 4.5 - 5.5 9 111 3000 220 86 am1d - 0512 sh30 - r z 4.5 - 5.5 12 83 3000 100 87 am1d - 0515 sh30 - r z 4.5 - 5.5 15 66 3000 100 87 a m1d - 1205 sh30 - r z 10.8 - 13.2 5 200 3000 220 84 am1d - 1209 sh30 - r z 10.8 - 13.2 9 111 3000 220 86 am1d - 1212 sh30 - r z 10.8 - 13.2 12 83 3000 100 88 am1d - 1215 sh30 - r z 10.8 - 13.2 15 66 3000 100 88 am1d - 15 05 sh30 - r z 13.6 - 16.5 5 200 3000 220 84 am1d - 15 09 sh30 - r z 13.6 - 16.5 9 111 3000 220 86 am1d - 15 12 sh30 - r z 13.6 - 16.5 12 83 3000 100 87 am1d - 15 15 sh30 - r z 13.6 - 16.5 15 66 3000 100 89 am1d - 2405 sh30 - r z 21.6 - 26.4 5 200 3000 220 83 am1d - 2409 sh30 - r z 21.6 - 26.4 9 111 3000 220 86 am1d - 2412 sh30 - r z 21.6 - 26.4 12 8 3 3000 100 87 am1d - 2415 sh30 - r z 21.6 - 26.4 15 66 3000 100 87 am1d - 48 05 sh30 - r z 43.6 - 52.8 5 200 3000 220 79 am1d - 48 09 sh30 - r z 43.6 - 52.8 9 111 3000 220 82 am1d - 48 12 sh30 - r z 43.6 - 52.8 12 83 3000 100 82 am1d - 48 15 sh30 - r z 43.6 - 52.8 15 66 3000 100 81 ? rohs complian t ? operating temperature - 40 o c to + 85 o c ? high efficiency up to 8 9 % ? s hort circuit protection ? low profile plastic package ? pin compatible with multiple manufacturers ? 7 pin sip package ? input / output isolation 1000 and 3000 vdc
series am1d - rz 1 watt | dc- dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12. c 2 of 5 north america only models dual output model input voltage (v) output voltage (v) output current max (ma) isolation (vdc) max capacitive load (uf) efficiency (%) am1d - 0505d - r z 4.5 - 5.5 5 100 1000 100 84 am1d - 0509d - r z 4.5 - 5.5 9 55 1000 100 86 am1d - 0512 d - r z 4.5 - 5.5 12 41 1000 47 87 am1d - 0515d - r z 4.5 - 5.5 15 33 1000 47 88 am1d - 1205d - r z 10.8 - 13.2 5 100 1000 100 85 am1d - 1209d - r z 10.8 - 13.2 9 55 1000 100 86 am1d - 1212d - r z 10.8 - 13.2 12 41 1000 47 89 am1d - 1215d - r z 10.8 - 13.2 1 5 33 1000 47 89 am1d - 1 5 05d - r z 13.6 - 16.5 5 100 1000 100 85 am1d - 1 5 09d - r z 13.6 - 16.5 9 55 1000 100 87 am1d - 1 5 12d - r z 13.6 - 16.5 12 41 1000 47 87 am1d - 1 5 15d - r z 13.6 - 16.5 15 33 1000 47 89 am1d - 2405d - r z 21.6 - 26.4 5 100 1000 100 84 am1d - 2409d - r z 21.6 - 26.4 9 55 1000 100 87 am1d - 2412d - r z 21.6 - 26.4 12 41 1000 47 87 am1d - 2415d - r z 21.6 - 26.4 15 33 1000 47 87 am1d - 48 05d - r z 43.6 - 52.8 5 100 1000 100 80 am1d - 48 09d - r z 43.6 - 52.8 9 55 1000 100 82 am1d - 48 12d - r z 4 3.6 - 52.8 12 41 1000 47 82 am1d - 48 15d - r z 43.6 - 52.8 15 33 1000 47 82 am1d - 0505 dh30 - r z 4.5 - 5.5 5 100 3000 100 84 am1d - 0509 dh30 - r z 4.5 - 5.5 9 55 3000 100 86 am1d - 0512 dh30 - r z 4.5 - 5.5 12 41 3000 47 87 am1d - 0515 dh30 - r z 4.5 - 5.5 15 33 3000 47 88 am1d - 1205 dh30 - r z 10.8 - 13.2 5 100 3000 100 85 am1d - 1209 dh30 - r z 10.8 - 13.2 9 55 3000 100 86 am1d - 1212 dh30 - r z 10.8 - 13.2 12 41 3000 47 89 am1d - 1215 dh30 - r z 10.8 - 13.2 15 33 3000 47 89 am1d - 1 5 05 dh30 - r z 13.6 - 1 6.5 5 100 3000 100 85 am1d - 1 5 09 dh30 - r z 13.6 - 16.5 9 55 3000 100 87 am1d - 1 5 12 dh30 - r z 13.6 - 16.5 12 41 3000 47 87 am1d - 1 5 15 dh30 - r z 13.6 - 16.5 15 33 3000 47 89 am1d - 2405 dh30 - r z 21.6 - 26.4 5 100 3000 100 84 am1d - 2409 dh30 - r z 21.6 - 26. 4 9 55 3000 100 87 am1d - 2412 dh30 - r z 21.6 - 26.4 12 41 3000 47 87 am1d - 2415 dh30 - r z 21.6 - 26.4 15 33 3000 47 87 am1d - 48 05 dh30 - r z 43.6 - 52.8 5 100 3000 100 80 am1d - 48 09 dh30 - r z 43.6 - 52.8 9 55 3000 100 82 am1d - 48 12 dh30 - r z 43.6 - 52.8 12 41 3000 47 82 am1d - 48 15 dh30 - r z 43.6 - 52.8 15 33 3000 47 82 note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. in put specifications parameters nominal typical maximum units voltage range 5 4.5 - 5.5 vdc 12 10.8 - 13. 2 15 13.6 - 16.5 24 21.6 - 26.4 48 43.6 - 52.8 filter capacitor
series am1d - rz 1 watt | dc- dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12. c 3 of 5 north america only input specifications (continued) parameters nominal typical maximum units vol tage range 5 4.5 - 5.5 vdc 12 10.8 - 13. 2 15 13.6 - 16.5 24 21.6 - 26.4 48 43.6 - 52.8 filter capacitor absolute maximum rating 5 vin 9 vdc 12 vi n 18 15 vin 20 24 vin 30 48 vin 54 peak input voltage time 100 ms input reflec ted ripple current 5 & 12vin 20 ma p -p 15 vin 30 24vin 40 48 50 isolation specifications parameters conditions typical rated units tested i/o voltage 3 sec 1000, 3000 vdc resistance > 1 000 mohm capacitance 60 pf output specifi cations parameters conditions typical maximum units voltage accuracy 3 % voltage balance (dual output model) balanced load 1 % short circuit protection momentary (1 sec) line voltage regulation for 1.0% of vin 1. 2 % load voltage regulation lo ad 1 0~100% 6 % temperature coefficient 0.02 %/ o c ripple & noise at 20mhz bandwidth 5 0 mv p - p general specifications parameters conditions typical maximum units switching frequency 100 % load 7 0 khz operating temperature full load without dera ting - 40 to +85 o c storage temperature - 40 to +125 o c max case temperature + 100 o c cooling free air convection humidity 9 5 % case material non - conductive black plastic ( ul94v - 0 rated) weight 2 .3 g dimensions (l x w x h) 0.76 x 0.24 x 0.3 7 inc h 19.50 x 6.00 x 9.50 mm mtbf > 2 000 000 hrs (mil - hdbk - 217f, ground benign, t=+25 o c)
series am1d - rz 1 watt | dc- dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12. c 4 of 5 north america only safety specifications parameters agency approval ce s tandards en55022: 2006 + a1: 2007, class b en55024: 1998 + a1: 2001 + a2:2003 iec61000 - 4 - 2 :200 8 iec61000 - 4 - 3 : 2006 + a1: 2007 iec61000 - 4 - 4, 2004 iec61000 - 4 - 6 : 2008 iec61000 - 4 - 8 : 1993 + a1:2000 pin out specifications pin 1000vdc 3000vdc single dual single dual 1 + v input + v input + v input + v input 2 - v input - v input - v input - v input 4 - v output - v output no pin no pin 5 no pin common - v output - v output 6 + v output + v output no pin common 7 no pin no pin + v output + v output dimensions : 19.50 (0.76) 15.20 (0.60) 2.54 (0.10) 6.00 (0.24) printed face 0.50 (0.02) 0.50 (0.02) 0.25 (0.01) 1.25 (0.05) 6.00 (0.24) 9.50 (0.37) 9.50 (0.37) 3.05 (0.12) 0.50 (0.02) note: unit:mm [inch] pin tolerances: 0.10mm [ 0.004inch] general tolerances: 0.25mm [ 0.010inch]
series am1d - rz 1 watt | dc- dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12. c 5 of 5 north america only conducted emissions eft note: 1. datasheets are updated as needed and as such, specifications are subject to change without notice. once printed or downloaded, datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specific ations. 2. product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. ca s numbers and other limited information are considered proprietary and may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control s ystems or other s uch applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s standard terms of sale available at www.aimtec.com.
|
